Dayton Superior - Concrete Repair And Sacking
Dayton (Re-Crete 5 Minute)
General purpose cement based concrete repair and patching material. Recrete 5 Minute is specially formulated to provide a very fast setting repair mortar with excellent workability. Recrete 5 Minute can be used for repair and patching of vertical, overhead and horizontal areas subject to light traffic both interior and exterior.
Dayton (Re-Crete 20 Minute)
General purpose concrete patching product which can be used to repair concrete pipe, precast concrete products, large floor cracks, concrete steps, walls, columns, concrete blocks, sidewalks, driveways, etc. This product is ideal for vertical and overhead applications and it’s ability to be shaped, molded and sanded.
Dayton (Architectural Finish)
Trowel applied mortar designed to eliminate concrete surface blemishes, rough areas, air holes and chips on poured walls. The material dries a light gray color and can be sanded to provide a smooth finish. This product develops a high strength that is compatible with concrete and is not sensitive to water after curing.
Applications can be used on vertical or overhead surfaces, interior or exterior, above or below grade.
Raeco Products - Resurfacing And Self Leveling
Is a two component, concrete repair and topping compound consisting of a premixed blend of portland cements and graded washed silica aggregates with a liquid latex modifier to promote lasting surface adhesion. Suitable for interior and exterior use, a sealer or coating is recommended when used for a wearing surface.
Excellent for smoothing rough floors, repairing pinholes, cracks and minor imperfections for linoleum, vinyl, carpet and other finished floor products. This product is used primarily for horizontal surfaces, for interior or exterior use, and can be sanded to a very smooth finish. Buttercoat is a two component, concrete repair and topping compound consisting of a uniform, premixed blend of Portland cements and graded aggregates with a liquid latex modifier to promote lasting surface adhesion.
Is a self‐leveling, structural grade, interior or exterior floor topping mortar containing
Portland cement, graded aggregates, polymer and control additives. Mixed only with water, it becomes a free flowing material that achieves a flat and smooth surface. SLT‐HS produces a smooth, hard and durable wearing surface or is ready to receive a finish floor.
Is a single componet compound designed for smoothing and patching floors and walls on projects where an ultra smooth surface is desired and when drying time is critical. RAECO Glide may be used over concrete, masonry, plywood, approved wood underlayments, terrazzo, tile/stone and cement backer board. This product is intended for non‐structural surface repairs on both interior or exterior floors and walls.